Radiator hoses: Flash point in the Jeep engine bay

Chief flash point of Jeep engine operations is located in the radiator block. It is where engine heat from combustion are absorbed. Connected via a network of Jeep radiator hoses to the engine and cylinder head, the radiator circulates a water and coolant mixture throughout the engine system. It takes heat off the engine. And, after the coolant has circulated the engine system, the Jeep radiator absorbs the heat and radiates it out of the engine bay. In the process, however, the Jeep radiator hose slowly gets prone to leakage and necessitates periodic checkup.

The Jeep radiator hose typically has a limited service life. Most Jeeps carry molded radiator hose designs made from a highly flexible rubber compound, while performance grade radiator hoses are manufactured from silicone material. Because of the heated coolant and the hot engine bay condition, the Jeep radiator hose takes pains to withstand high heat. Continuous contact with hot fluids causes the hose to get hard and brittle. Over time, coolant can leak out of the brittle portion of the radiator hose. Additionally, the clamps that hold the hose to the radiator block can also loosen and leak out coolant. Once the close-ended circulation of the coolant happens, the Jeep radiator hose overheats the engine and stall the car.

While the <a href="http://www.jpartsonline.com/jeepradiatorhose.html">Jeep radiator hose</a> durability depends on its make, it banks on its design for performance. Jeep radiator hoses are available in three types: straight, curve, and double end. Apart from the silicone hoses, Jeep radiator hoses have knitted rayon reinforcement, which provides the high tensile strength of the rubber and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations in the engine bay. But in the end, little things like Jeep radiator hose inspection can prevent overheating your car on the road. Keep in mind that the rubber radiator hose works in a harsh underhood condition. Like other maintenance parts, a radiator hose needs to be regularly inspected, and replaced at the first sign of coolant leak.