Being A Smart Down Consumer
Considering investing in Down Products? Here are several things to consider
before doing so.
Let's start with a brief description of Down vs. Feathers
There are two main sources of Down and Feathers on the market today. One is
product from Ducks and the other from Geese. There are both grey feathers and
white feathers. Feathers are two dimensional with a quill running up the
center. Down is more of a puffball or something akin to a 'dust kitty' with
no quill. It is this puffball that allows the down to trap air and gives it
it's superior insulating abilities. It also allows breathability that
synthetics do not.
Feathers are Larger than down clusters and are primarily used for support and
firmness in items such as pillows and feather beds. Personally I like the
firmer pillows such as the 10/90 mix offered at
<a href="http://www.creativethreadarts.com>Creative Thread Arts<a/>. So do
many of my clients because they offer perfect support as a sofa pillow.
Normally the down and feathers you find in these types of items are from
ducks as opposed to geese unless specifically labeled. If your label says
Waterfowl', chances are it is duck down and / or feathers.
Down is considered to be better for comforters because Geese are larger than
ducks therefore producing larger down clusters that will increase the
insulating properties and of course the price as well. In short, the larger
the bird and the more north in lives, the bigger and better the down. On the
other hand, it is also a misperception that Duck Down is an inferior product.
As an aside...I have found in my 13+ years of selling custom made down and
feather products such as pillows and custom made cushion wraps and the like
that duck is NOT inferior to Goose and my clients have come to the same
conclusion. I am aware that many others do not agree and my philosophy is it'
s all 'to taste'
Types of product constructions:
Thread Count: Thread Count is simply the total number of threads per 1 square
inch of fabric. Any thread count of 230 and up is good. 100% Cotton Cambric
is best for Down and Feather items of all kinds.
Sew Through: A Sewn Through construction is a style where the stitching goes
through both layers of cotton and the filling is trapped in between each
horizontal box. This is a great style for warmer climates and /or warmer
bedrooms.
Baffle Box: A Baffle Box type (also called a tri-wall or channel tri-wall)
is one where the cotton is sewn in the shape of a 3 dimensional box with
another piece of cotton sewn into the center of it on slant (from Northeast
Corner to Southwest corner) so the Down stays in each of these boxes and
doesn't get shifted all around. Its 3D shape also allows it to retain its
loft.
General Terms:
Fill power: Fill Power is a measure of 'Loft' or 'Fluff" in any finished
product. The test is done by placing 1 (one) ounce of down in a clyinder and
placing a weight on top of it. 60 seconds later it is checked to see how far
it has sunk and is compared with the spacial markings on the cylinder. Then
it is done again to the same down in the same cylinder several days later,
averaged out, and this average is your fill power number. The higher the fill
power, the more air the down is trapping, the better it's insulating
properties and the more warmth it will retain. There are also several other
factors that can influence fill power. These are sitting and settling in
transit, temperature and humidity. A fill power of 650 or higher is
considered high quality.
Mix: Mix is the percentage of down/feathers and possibly other fillers in
an item. This Number or percentage is displayed on a law label as a fraction
with the Down always being first. A law label that says 10/90 simply means
that the mix is 10% Down and 90% feathers. The Government controls in the USA
are somewhat loose in the feather and down industry in that there is a 10%
variance allowed for the amount of down in an item. Even when it says 10%
down and 90% feathers it could still be all feathers. It is always wise to
deal with a reputable company that is willing to back its claims of contents.
Creative Thread Arts & Upholstery deals with these types of companies only.
You can be assured what we claim is in there IS IN THERE.
Turbidity test: The Turbidity Test in not a common specification where Law
Labels are concerned but we might as well discuss it. A Turbidity test is the
measure of dust, dirt and other impurities in the down. It entails filling a
beaker with water and 10 grams of down. It is then shaken to within an inch
of its life (15 minutes really) and then it is checked for clarity when the
tester looks for crosshairs at the bottom of the beaker. The higher the water
level, the cleaner the product. The highest measure is 550. Excellent! A
measure of 300 is considered acceptable here in the USA.
Oxygen test An oxygen test is for organic materials that may be traveling on
the down and feathers from the processing plants. It works with the same
water from the Turbidity test. Its long and complicated but in essence it is
applying measured chemicals to the water from the last test and shows the
amount of organic materials in the product. A count of 4.8 or lower is a good
passable Oxygen Test.Considering investing in Down Products? Here are several
things to consider before doing so.
Let's start with a brief description of Down vs. Feathers
There are two main sources of Down and Feathers on the market today. One is
product from Ducks and the other from Geese. There are both grey feathers and
white feathers. Feathers are two dimensional with a quill running up the
center. Down is more of a puffball or something akin to a 'dust kitty' with
no quill. It is this puffball that allows the down to trap air and gives it
it's superior insulating abilities. It also allows breathability that
synthetics do not.
Feathers are Larger than down clusters and are primarily used for support and
firmness in items such as pillows and feather beds. Personally I like the
firmer pillows such as the 10/90 mix offered at Creative Thread Arts. So do
many of my clients because they offer perfect support as a sofa pillow.
Normally the down and feathers you find in these types of items are from
ducks as opposed to geese unless specifically labeled. If your label says '
Waterfowl', chances are it is duck down and / or feathers.
Down is considered to be better for comforters because Geese are larger than
ducks therefore producing larger down clusters that will increase the
insulating properties and of course the price as well. In short, the larger
the bird and the more north in lives, the bigger and better the down. On the
other hand, it is also a misperception that Duck Down is an inferior product.
As an aside...I have found in my 13+ years of selling custom made down and
feather products such as pillows and custom made cushion wraps and the like
that duck is NOT inferior to Goose and my clients have come to the same
conclusion. I am aware that many others do not agree and my philosophy is it'
s all 'to taste'
Types of product constructions:
Thread Count: Thread Count is simply the total number of threads per 1 square
inch of fabric. Any thread count of 230 and up is good. 100% Cotton Cambric
is best for Down and Feather items of all kinds.
Sew Through: A Sewn Through construction is a style where the stitching goes
through both layers of cotton and the filling is trapped in between each
horizontal box. This is a great style for warmer climates and /or warmer
bedrooms.
Baffle Box: A Baffle Box type (also called a tri-wall or channel tri-wall)
is one where the cotton is sewn in the shape of a 3 dimensional box with
another piece of cotton sewn into the center of it on slant (from Northeast
Corner to Southwest corner) so the Down stays in each of these boxes and
doesn't get shifted all around. Its 3D shape also allows it to retain its
loft.
General Terms:
Fill power: Fill Power is a measure of 'Loft' or 'Fluff" in any finished
product. The test is done by placing 1 (one) ounce of down in a clyinder and
placing a weight on top of it. 60 seconds later it is checked to see how far
it has sunk and is compared with the spacial markings on the cylinder. Then
it is done again to the same down in the same cylinder several days later,
averaged out, and this average is your fill power number. The higher the fill
power, the more air the down is trapping, the better it's insulating
properties and the more warmth it will retain. There are also several other
factors that can influence fill power. These are sitting and settling in
transit, temperature and humidity. A fill power of 650 or higher is
considered high quality.
Mix: Mix is the percentage of down/feathers and possibly other fillers in
an item. This Number or percentage is displayed on a law label as a fraction
with the Down always being first. A law label that says 10/90 simply means
that the mix is 10% Down and 90% feathers. The Government controls in the USA
are somewhat loose in the feather and down industry in that there is a 10%
variance allowed for the amount of down in an item. Even when it says 10%
down and 90% feathers it could still be all feathers. It is always wise to
deal with a reputable company that is willing to back its claims of contents.
<a href="http://www.creativethreadarts.com>Creative Thread Arts & Upholstery<
a/>deals with these types of companies only. You can be assured what we claim
is in there IS IN THERE.
Turbidity test: The Turbidity Test in not a common specification where Law
Labels are concerned but we might as well discuss it. A Turbidity test is the
measure of dust, dirt and other impurities in the down. It entails filling a
beaker with water and 10 grams of down. It is then shaken to within an inch
of its life (15 minutes really) and then it is checked for clarity when the
tester looks for crosshairs at the bottom of the beaker. The higher the water
level, the cleaner the product. The highest measure is 550. Excellent! A
measure of 300 is considered acceptable here in the USA.
Oxygen test An oxygen test is for organic materials that may be traveling on
the down and feathers from the processing plants. It works with the same
water from the Turbidity test. Its long and complicated but in essence it is
applying measured chemicals to the water from the last test and shows the
amount of organic materials in the product. A count of 4.8 or lower is a good
passable Oxygen Test.













