Disk Defragmentation Problem— How To Solve Defragmenting Problems

If you computer is running slower and slower, what would you do? Normally, besides using anti-virus software, defragmentation is also a good choice. However, some users may have encountered many problems during defragmenting disks. It is really annoying since you want to speed up the computer but only find that the defragmentation cannot work.

So, in this article, I would like to share my methods of in solving defragmenting problems. If your defragmentation can not continue to work while it just runs a small portion of it and then start from the very beginning again and again, this is the article you should read so as to finish the defragmenting task.

Generally speaking, in such circumstance, you should first check whether you have closed down screen saver, monitor power and anti-virus software or not. It is a must to shut them down ahead of defragmenting the disk. You can do that by following the steps below.

Right–click the blank of desktop to choose “Properties”, in the “Display Properties”, you should click “Screen Saver” and set “None” in this tab. And if there is any other screen protecting program, please remember to close down all of them. In the same tab, there is “Monitor power”, click “Power”. In the “Power Options Properties”, you should choose “Never” in the “Turn off hard disk” and “System standby” respectively.

Besides, some anti-virus software may interfere in defragmenting disks while some may not. If you have closed down screen saver and monitor power but are still troubled with this problem, you can attempt to turn off anti-virus software and try to defragment again. Just bear in mind that any read-write operation in the defragmenting process can result in defragmentation startup again and again.

By doing the operations mentioned above, you are supposed to defragment disk smoothly. If not, you feel free to click here to find more methods to solve defragmenting problems.